Free Vpn Services For Iphone: How to bypass ISP restrictions

How to bypass ISP restrictions

How to bypass ISP restrictions -

In this article, we explain how to bypass ISP restrictions so you can continue using Hide My Ass! Pro VPN.

Sometimes, you may experience a VPN connection problem due to local IP addresses via network filter, for example, when the restriction / blockage VPN ports the related traffic.

Before continuing with this tutorial on how to bypass ISP restrictions, please visit Hide My Ass! Help Center where you will find instructions on How to download, connect and use HMA! Pro VPN because this will solve most of the VPN connection problems.

If you are still having VPN connection problems after following the tips outlined in our Help Center, please follow the steps below on how to bypass restrictions PSI.

How to bypass ISP restrictions

1. First, run the HMA! Pro VPN software by right clicking and selecting "Run as administrator" and try to connect to the VPN using OpenVPN protocol.

2. Open the HMA! Pro VPN client and navigate to "Select Country." Then in the menu named "list servers" select "All servers" as shown in the screenshot below.

3. Then go to "Speed Guide" and click "Server Name" and click "Ping test" to see which servers are available, as shown in the image below.

once the Ping test is finished, connect to servers that the software was able to ping, not those who "Timed out" to subsequently, as shown in the image below.

4. When connecting to HMA! Pro VPN servers Please use our " Auto-path " functionality with OpenVPN protocol because that find the optimal path for you and use several different ports to establish a connection.

Autopath To activate, click on "Control Panel" then click the "Settings" tab. Then, check the Auto-way box as shown below

Please note :. It may take a little longer for this connection to be established.

5. Indirect connection via IP: Port proxy

The connection "Auto-Path." quality then depend on the proxy of quality and therefore differs from proxy to proxy, so you'll need to try some

The steps are as follows :.

1. Get some HMA! Port of proxies: IP. If they are stuck trying to go through web proxy.

2. Enter the IP address and port in the HMA! Software tab "Proxy Settings" (without authentication, unless so required by proxy).

3. Enable "Auto-Path" on the dashboard under the "Settings" tab.

4. Connect using the OpenVPN protocol. If that does not work, try the next proxy.
The same method can also be used via OpenVPN GUI or Tunnelblick as well as all other methods of OpenVPN connection. What is important is that the client can be configured to use a proxy, or the operating system itself. For self-path effect, increase sequentially VPN port 1 (53, 54, 55 ... / 443, 444, 445 ...) by editing the configuration file * .ovpn.

5. alternative protocol L2TP

If you are unable to connect using either TCP or OpenVPN OpenVPN-TCP with or without Auto-way, and PPTP fails, and / or advice posed above do not solve the problem, please try using L2TP as this can often circumvent restrictions ISP.

Here are the installation instructions for the following operating systems using LT2P.

Windows L2TP Connection
Mac L2TP Connection
Android Jelly Bean L2TP
iOS: iPad Configuration / iPhone / iTouch via L2TP VPN

If the PPTP or L2TP does not work for you on your mobile device, please try to connect to OpenVPN:

iOS: iPad / iPhone / iTouch configuration via the OpenVPN protocol using OpenVPN connect
OpenVPN connect on Android

router connections

If you use your VPN router to connect, please make sure that you have the supported firmware that will allow you to use OpenVPN with UDP such as DD-WRT (either Big or Mega firmware, and build 14896 21676 or revision).

to manually configure your router with OpenVPN, please use the instructions below:

OpenVPN client configuration manual for DD routers -WRT

1. Check "Start with WAN"
2. "interface Type": Choose "TUN" the drop down menu
3. "Protocol" choose "UDP" from the dropdown menu
4. "server Address" Enter the IP address of the server you want to connect. In the "Port" field, please note that all ports 49152-65535 should work, eg 57418
5. "Firewall": Automatic
6. "authorization mode": Choose "TLS"
7. "additional authorization HMAC": Choose "Off"
8. Check "Server is on the same" subnet "

please note: If you use the Tomato firmware for your router, please change the port a higher random port number and try to replace the firewall restrictions.