Free Vpn Services For Iphone: How can I configure DD-WRT router using PPTP?

How can I configure DD-WRT router using PPTP?

How can I configure DD-WRT router using PPTP? -

In this tutorial, we'll show you how to configure your DD-WRT router using PPTP. Using PPTP and L2TP (discussed next week), is much easier to install than using OpenVPN, and is generally faster than using L2TP.

If you have problems with the speed, or experience problems connecting, you should try using all three protocols (PPTP, OpenVPN and L2TP.)

For set your DD-WRT router using PPTP, you'll need a router with DD-WRT firmware installed last. If you are not sure if your router supports DD-WRT firmware, then please check their list router database or supported devices . The firmware used in this tutorial is "v24-sp2 (08/07/10) std" with D-LINK DIR 0.

NOTE :. If you need help, please read this article carefully and completely DD-WRT troubleshooting because it covers most of the questions and solutions

Okay, so let's start. Here are the instructions for the DD-WRT firmware:

1. Go to the DD-WRT Control Panel (usually http://192.168.1.1/ - default user name "root" password "admin")
2. Configure
3. basic Configuration
4. WAN Configuration
5. connection Type: PPTP
6. Use DHCP Yes
7. Gateway (PPTP server): Enter one of the server IP addresses that you can find by logging on VPN control panel and clicking " Software & Support ". Then click on " See " next to " manually set-up VPN - No software "
8. Username: VPN Your account name user
9. password: Enter your PPTP password . Find this in the VPN Control Panel and click on " Software & Support ". Then click on " See " next to " set-up VPN manually - No software "
10. Login Policy: Keep Alive: Redial Period - It is your choose how many seconds you choose. We recommend a minimum of 30 seconds
11. PPTP Encryption :. Enable
12. Disable Packet Reorder: Enable
13. Other PPTP options: mppe necessary, stateless
14. STP: Disable
15. Leave everything else as it is
16. Save and Apply